
Solar water heater 100L, pressurised, stainless steel
- All prices include VAT
- Fast delivery
- Quality guarantee
SPECIAL OFFER FREE INSTALLATION
THIS OFFER IS VALID ONLY IN TASHKENT, ANDIJAN, NAMANGAN AND FERGANA!
Additional products required for installation and delivery costs are calculated separately.
Offer valid until 31.12.2025
Solar water heaters are devices that heat water using solar energy and deliver it to the user, transferring water efficiently; they can also be connected directly to the water supply, which is convenient for using hot water.
Copper heat rods are used to transfer thermal energy and provide fast operation. It can also be used in cold regions, because there is no water inside the vacuum tubes, so the tubes do not freeze or crack in winter.
Each vacuum tube
operates independently, so if several tubes are accidentally damaged, the system continues to work without stopping.
If this pressurised solar water heater is connected to the building's heating system, it will supply hot water.
Stainless steel frame – 1 set
Glass vacuum tubes – 10 pcs.
Electric heating element: 1.5 kW.
Controller: Tk-7Y.
Water heating temperature: minimum temperature: +30 +50 (in winter) maximum temperature: +80 +90 (in summer)
Warranty – 3 years for the solar water heater, 1 year for accessories.
Service life over 20 years.
Heat retention: 72 hours.
Inner tank material: SS 201 stainless steel, 0.4 mm thick
Outer tank material: SUS304 food-grade stainless steel, 1.4 mm thick
Tank insulation layer: 55 mm high-density polyurethane foam, 45 kg/m3
Inlet and outlet: g 3/4 connector
Maximum pressure: 0.6 MPa
Solar collector tube: borosilicate glass 3.3 mm thick, coated with N/Al
Glass tube thickness: 1.6 mm
Vacuum tube tightness: P< = 0.005 Pa
Absorption: as = 0.93 – 0.96 (AM1.5)
Emissivity coefficient: 0.04-0.06 (80°C +-5°C)
Standby heat loss object parameters: Y = 220-260 m2.C/kW
Average heat loss coefficient: ULT = 0.6~0.7 W/(m2.C)
Welding: Argon arc
- Electric heater
- 1,5 kVt
- Controller
- Tk-7Y
- Water heating temperature
- minimum temperature: +30 +50 (in winter) maximum temperature: +80 +90 (in summer)
- Heat retention
- 72 hours
- Inner tank material
- SS 201 stainless steel, thickness 0.4 mm
- Outer tank material
- SUS304 food-grade stainless steel, thickness 1.4 mm
- Tank insulation
- 55 mm high-density polyurethane foam, 45 kg/m3
- Inlet and outlet
- G 3/4 connector
- Maximum pressure
- 0,6 MPa
- Collector tube
- borosilicate glass, 3.3 mm thick, coated with N/Al
- Glass tube thickness
- 1.6 mm
- Tube vacuum
- P< = 0,005 Pa
- Absorptance
- as = 0.93 – 0.96 (AM1.5)
- Emittance
- 0,04-0,06 (80°C +-5°C)
- Object parameters for sunset in standby mode
- Y = 220-260 m2.C / kVt
- Average heat loss coefficient
- ULT = 0,6~0,7 Vt / (m2.C)
- Welding
- Argon arc welding











